
On your first try, list only one radio station per city. Pick out the station people most interested in your product would be listening to. This can be determined by the programming description contained within the data block about the station in the Broad casting Yearbook or the SRDS Directory.
Let’s say that you’re listed 250 different radio stations. It’s best to list the stations you want to contact alphabetically by the city or town they’re licensed to serve, with a tab separating each state. The next step is either a phone call or a letter to the station manager of each of the stations.
This first contact should be in the way of introducing yourself, and inquiring if they would consider a PI Advertising campaign. You tell the station manager that you have a product you feel will sell very well in his market, and would like to test it before going ahead with a paid advertising program.
You must quickly point out that your product sells for, say $5, and that during this test, you would allow him 50% of that for each response his station pulls for you. Explain that you handle everything for him: the writing of the commercials, all accounting and bookkeeping, plus any refunds or complaints that come in.
In other words, all he has to do is schedule your commercials on his log, and give them his “best shot.” When the responses come in, he counts them, and forwards them on to you for fulfilment. You make out a check for payment to him, and everybody is happy.
If you’ve contacted him by phone, and he agrees to look over your material, tell him thank you and promise to get a complete “package” in the mail to him immediately. Then do just that. Write a short cover letter, place it on top of your “ready-to-go” PI Advertising Package, and get it in the mail to him without delay.
If you’re turned down, and he is not interested in “taking on” any PI Advertising, just tell him thanks, make a notation in your notebook by his name, and go on to your next call. Contacting these people by phone is by far the quickest, least expensive and most productive method of “exploring” for those stations willing to consider your PI proposal. In some cases though, circumstances will deem it to be less expensive to make this initial contact by letter or postcard.
In that case, simply address your card or letter to the person you are trying to contact. Your letter should be positive in tone, straight-forward and complete. Present all the details in logical order on one page, perfectly typed on letterhead paper, and sent in a letterhead envelope. (Rubber-stamped letterheads just won’t get past a first glance.)
Ideally, you should include a self-addressed and stamped postcard with spaces for positive or negative check marks in answer to your questions: Will you or won’t you look over my materials and consider a mutually profitable “Per Inquiry” advertising campaign on your station?
Once you have an agreement from your contact at the radio station that they will look over your materials and give serious consideration for a PI program, move quickly, getting your cover letter and package off by First Class mail, perhaps even Special Delivery.
What this means is that at the same time you organize your “radio station note book,” you’ll also want to organize your advertising package. Have it all put together and ready to mail just as soon as you have a positive response. Don’t allow time for that interest in your program to cool down.
You’ll need a follow-up letter. Write one to fit all situations; have 250 copies printed, and then when you’re ready to send out a package, all you’ll have to do is fill in the business salutation and sign it. If you spoke of different arrangements or a specific matter was discussed in your initial contact, however, type a different letter incorporating comments or answers to the points discussed. This personal touch won’t take long, and could pay dividends!
You’ll also need at least two thirty-second commercials and two sixty-second commercials. You could write these up, and have 250 copies printed and organized as a part of your PI Advertising Package.
You should also have some sort of advertising contract written up, detailing everything about your program, and how everything is to be handled; how and when payment to the radio station is to be made, plus special paragraphs relative to refunds, complaints, and liabilities. All this can be very quickly written up and printed in lots of 250 or more on carbonless multi-part snap-out business forms.
Finally, you should include a self-addressed and stamped postcard the radio station can use to let you know that they are going to use your PI Advertising program, when they will start running your commercials on the air, and how often, and during which time periods. Again, you simply type out the wording in the form you want to use on these “reply postcards,” and have copies printed for your use in these mailings.
Watch the video related to radio station guide
www.Replay-AV.com How to Download/Capture/Rip/Save/Record BBC Radio or Archived BBC radio shows using Replay AV (Replay AV). How to use free Replay Media Guide to find BBC radio shows. How to schedule recording of Internet radio stations. Replay AV is downloadable software that will turn any Windows PC into an Automatic Streaming Audio/Video Recorder. It allows you to record and capture radio shows as well as many other media streams. Watch this video and you will learn: 1.) How to Record …
Help answer the question about radio station guide
XM radio station guide?Related posts:

September 7th, 2009 on 1:12 am
i don’t know they code plz tell me
September 7th, 2009 on 12:35 am
I don't like the music sorry. No I will not restore it
September 7th, 2009 on 12:37 am
You should add the launchast button (headphones icon) to the Y! toolbar. For IE, click the settings button (avatar) on the Y! toolbar, click add/edit buttons, click button gallery, and select category Show All Buttons. Add the button, save changes and click Finished.
September 7th, 2009 on 12:37 pm
September 8th, 2009 on 10:26 am
Here is the link
http://www.xmradio.com/onxm/index.xmc
ENJOY
September 9th, 2009 on 1:06 am
If you are going to post a list of radio stations, you need to get their permission to do that.
September 9th, 2009 on 3:25 am
http://www.radio-locator.com/?xyz=2
by city and genre not by show that'd be too hard.
September 9th, 2009 on 3:43 am
I would start at the bank. This is going to be expensive. You will need:
1. studio space
2. A transmitter site
3. a control panel
4. CD players, at least 3 commercial quality
5. a transmitter
6. a link to the transmitter if it is at a site different from you studio. If your studio and transmitter are at the same site you will need a lot of RF shielding so the signal from your antenna won't invade your electronics and degrade your signal.
7. an antenna
8. a library of music or other program material
9, an air staff of announcers etc.
10. an office staff
11. an engineer/technician to maintain your equipment. This person must have a first class radio telephone license from the FCC
12. someone to install your equipment
13. a sales staff to sell commercial time to pay your bills
14. a construction permit from the FCC
15. a license from the FCC
16. possibly permits and craftsmen to build your studio or transmitter site
17. electrical hookup to the power company
18. telephone service
19. water service. Your staff will get thirsty and will need to use the rest room
20. a lawyer
If you've got the money, it would be a whole lot simpler to buy an existing station and program it as you like.
I don't mean to throw a wet blanket on your parade, but there's a whole lot more to setting up and running a radio station than setting up a home stereo.
September 9th, 2009 on 1:49 pm
to start a radio station anywhere in the world, just get an Internet connection, a microphone, and rent "REFLECTOR SPACE" to seed BIT TORRENT of your programmes.
Caution that a license must be purchased (through a CO-OP, about $14 a month) if you wish to play complete songs.
Soon, the reflector will be unnecessary, because 802.11-N+ is basically BIT TORRENT done at the hardware/RF level, using public frequencies, early experimenters report 500 MHz over village-wide areas., room for many channels of HDTV as well as audio channels.
802.11-DRAFT-N equipment is on store shelves now, and is already delivering enough bandwidth for a wireless MEDIA ROOM.
The most important component, is CONTENT. Now that anyone can be heard, the successful audio channel must engage the listener.
As far as the old fashioned kind of radio station… in the USA, the easiest way is to buy one already started.
September 9th, 2009 on 7:07 pm
I had the same problem!!
Since several days I couldn't listen to the radio anymore.
I thought maybe it's because I want to listen to American radio and I'm OUTSIDE the U.S…. I know that some radio don't allow people from outside the US to listen to them….
But yesterday I downloaded the new version of Windows Media Player which you can dowload at this link (it's free):
http://www.microsoft.com/windows/windowsmedia/default.mspx
And now MOST of the radios work agait!!
)
(not all of them, but most of them)
A good link to listen to radio online is:
http://www.surfmusic.de/
It works!